Este curso forma parte de Programa especializado: An Introduction to Programming the Internet of Things (IOT)

4.7
estrellas
6,879 calificaciones

96 %

Ian Harris

175.602 ya inscrito

Ofrecido Por

Programa especializado: An Introduction to Programming the Internet of Things (IOT)Universidad de California en Irvine

Acerca de este Curso

85.307 vistas recientes

The Arduino is an open-source computer hardware/software platform for building digital devices and interactive objects that can sense and control the physical world around them. In this class you will learn how the Arduino platform works in terms of the physical board and libraries and the IDE (integrated development environment). You will also learn about shields, which are smaller boards that plug into the main Arduino board to perform other functions such as sensing light, heat, GPS tracking, or providing a user interface display. The course will also cover programming the Arduino using C code and accessing the pins on the board via the software to control external devices. Please note that this course does not include discussion forums.
Upon completing this course, you will be able to:
      Outline the composition of the Arduino development board
      Describe what it means to program the board's firmware
      Read board schematics
      Install Arduino IDE
      Describe what "shields" are and how they are used
      Specify the role of libraries in the use of shields
      Compile and run a program
      Name C Variables and Types
      Name common C operators
    Use conditionals and loops
    Explain functions, their definition and invocation
    Explain the implications of global variables
    Undertake the Arduino build process
    Describe the role of the tools behind the IDE
    Describe how to invoke functions in classes
    Explain the structure of an Arduino sketch
    Access the pins of the Arduino
    Differentiate between digital and analog pin
    Debug embedded software
    Explain the importance of controllability and observability in the debugging process
    Describe common debugging architectures for embedded systems
    Explain how the UART Serial communication protocol works
    Describe how the Arduino Serial library performs serial communication

Fechas límite flexibles

Restablece las fechas límite en función de tus horarios.

Certificado para compartir

Obtén un certificado al finalizar

100 % en línea

Comienza de inmediato y aprende a tu propio ritmo.

Curso 2 de 6 en

Programa especializado: An Introduction to Programming the Internet of Things (IOT)

Aprox. 13 horas para completar

Inglés (English)

¿Podría tu empresa beneficiarse de la capacitación de los empleados en las habilidades más demandadas?

Prueba Coursera para negocios

Habilidades que obtendrás

Arduino
C Programming
Debugging

Fechas límite flexibles

Restablece las fechas límite en función de tus horarios.

Certificado para compartir

Obtén un certificado al finalizar

100 % en línea

Comienza de inmediato y aprende a tu propio ritmo.

Curso 2 de 6 en

Programa especializado: An Introduction to Programming the Internet of Things (IOT)

Aprox. 13 horas para completar

Inglés (English)

¿Podría tu empresa beneficiarse de la capacitación de los empleados en las habilidades más demandadas?

Prueba Coursera para negocios

Instructor

Calificación del instructor

4,71/5 (1047 calificaciones)

Ian Harris

Professor

Department of Computer Science

521.609 alumnos

9 cursos

Ofrecido por

Universidad de California en Irvine

Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.

Mira cómo los empleados de las mejores empresas dominan las habilidades más demandadas

Obtén más información sobre Coursera para Empresas

Programa - Qué aprenderás en este curso

Calificación del contenido96%(26,678 calificaciones)

Semana

Semana 1

3 horas para completar

Arduino Environment

This module provides an introduction to the Arduino environment which is composed of three things: the Arduino board, the Arduino IDE, and the Arduino-compatible shields together with their libraries. We first investigate the board, discussing all of its main components, inputs, and outputs. We discuss how each component is used and we examine the board schematic to see how they are connected. We then discuss the Arduino Integrated Development Environment (IDE) which is used primarily to write, compile, and upload code. We survey the interface of the IDE and discuss how to install and use it. We also examine the use of shields to extend the functionality of an Arduino-based system. We discuss how shield libraries provide a useful abstraction to facilitate programming.

3 horas para completar

9 videos (Total 51 minutos), 4 lecturas, 2 cuestionarios

9 videos

Module 1 Introduction (video)1m

Lecture 1.1: Arduino Platform8m

Lecture 1.2: Arduino Board7m

Lecture 1.3: Direct Programming3m

Lecture 2.1: Arduino Schematics4m

Lecture 2.2: Arduino IDE7m

Lecture 2.3: Compiling Code4m

Lecture 3.1: Arduino Shields and Libraries6m

Lecture 3.2: Arduino Basic Setup6m

4 lecturas

Pre-Course Survey10m

Course Overview10m

Module 1 Objectives10m

Module 1 Reading10m

1 ejercicio de práctica

Module 1 Quiz30m

Semana

Semana 2

3 horas para completar

C Programming

This module covers the basics of the C programming language which will be used to write code for the Arduino. The course first covers basic syntax, variables, and types. Most of the basic C operators are presented. Conditional statements (if, switch) and loops (while, for) are described. The concept of functions is presented together with how to define and call functions. Creation and use of global variables is explained.

3 horas para completar

9 videos (Total 62 minutos), 4 lecturas, 2 cuestionarios

9 videos

Module 2 Introduction (video)54s

Lecture 1.1: Setting Up Your Environment7m

Lecture 1.2: Hello World6m

Lecture 1.3: Variables4m

Lecture 2.1: Basic C Operators6m

Lecture 2.2: Conditionals7m

Lecture 2.3: Loops8m

Lecture 3.1: Functions10m

Lecture 3.2: Global Variables7m

4 lecturas

Module 2 Objectives10m

Module 2 Mandatory Reading10m

Module 2, Recommended Reading10m

Planning Ahead for Modules 3 and 410m

1 ejercicio de práctica

Module 2 Quiz30m

Semana

Semana 3

3 horas para completar

Arduino Programs

This module describes the composition of an Arduino program, or sketch, and the process by which it is compiled and uploaded. The Arduino IDE is a user interface for the software tools which actually compile and upload the program. We outline the use of these tools in the build process. We describe the basic structure of a sketch, including the use of the setup() and loop() functions. The main interface of an Arduino is through its pins, so we describe how to access those pins from a sketch.

3 horas para completar

10 videos (Total 58 minutos), 3 lecturas, 2 cuestionarios

10 videos

Module 3 Introduction (video)1m

Lecture 1.1: Arduino Toolchain5m

Lecture 1.2: Cross-Compilation4m

Lecture 1.3: Arduino Sketches9m

Lecture 2.1: Classes7m

Lecture 2.2: Sketch Structure4m

Lecture 2.3: Pins7m

Lecture 3.1: Input and Output6m

Lecture 3.2: Blink Example5m

Video Demonstration: Arduino Blink Example4m

3 lecturas

Module 3 Objectives10m

Module 3 Reading10m

Information About the Arduino10m

1 ejercicio de práctica

Module 3 Quiz30m

Semana

Semana 4

3 horas para completar

Module 4

This module is an introduction on debugging embedded software on an Arduino. We discuss the basic debugging requirements: controllability and observability. The debugging environment available for an Arduino UNO is limited, so we describe how to use the UART communication protocol to gain controllability and observability. We present the use of the Serial library to communicate with the Arduino through the serial monitor.

3 horas para completar

9 videos (Total 72 minutos), 4 lecturas, 2 cuestionarios

9 videos

Module 4 Introduction (video)1m

Lecture 1.1: Debugging12m

Lecture 1.2: Debug Environments12m

Lecture 1.3: Debug via Serial8m

Lecture 2.1: UART Protocol7m

Lecture 2.2: UART Synchronization7m

Lecture 2.3: UART Parity and Stop6m

Lecture 3.1: Serial on Arduino (Updated)11m

Lecture 3.2: Reading from Serial4m

4 lecturas

Module 4 Objectives10m

Module 4 Reading10m

Information about the Arduino10m

End-of-Course Survey10m

1 ejercicio de práctica

Module 4 Quiz30m

Reseñas

4.7

1559 reseña

5 stars
73,23 %
4 stars
21,54 %
3 stars
3,64 %
2 stars
0,84 %
1 star
0,72 %

Principales reseñas sobre THE ARDUINO PLATFORM AND C PROGRAMMING

por KH10 de feb. de 2017

It is a very a nice course from my point of view. Teaching standard is good and the way classes have been distinguished become helpful to learn the core concept behind the Arduino.

por AK15 de abr. de 2021

I like the instructor a lot and his teaching is amazing. Also I had the opportunity to work with Arduino board and get hands on it. But overall course level was too easy for me in terms of coding.

por MA26 de sep. de 2020

A very good course to give yourself a start in the world of embedded systems. The content is very focused, straight to the point and organized. I loved it and I would recommend it for you.

por TK31 de ago. de 2020

I enjoyed a lot during this course and also learned some great arduino lessons and practicals. I can confidently tell you that I can do some actual arduino programs in real time applications.

Ver todas las reseñas

Acerca de Programa especializado: An Introduction to Programming the Internet of Things (IOT)

Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.

This Specialization covers embedded systems, the Raspberry Pi Platform, and the Arduino environment for building devices that can control the physical world. In the final Capstone Project, you’ll apply the skills you learned by designing, building, and testing a microcontroller-based embedded system, producing a unique final project suitable for showcasing to future employers. Please note that this specialization does not offer discussion forums.

An Introduction to Programming the Internet of Things (IOT)

Preguntas Frecuentes

¿Cuándo podré acceder a las lecciones y tareas?
El acceso a las clases y las asignaciones depende del tipo de inscripción que tengas. Si tomas un curso en modo de oyente, verás la mayoría de los materiales del curso en forma gratuita. Para acceder a asignaciones calificadas y obtener un certificado, deberás comprar la experiencia de Certificado, ya sea durante o después de participar como oyente. Si no ves la opción de oyente:
es posible que el curso no ofrezca la opción de participar como oyente. En cambio, puedes intentar con una Prueba gratis o postularte para recibir ayuda económica.
Es posible que el curso ofrezca la opción 'Curso completo, sin certificado'. Esta opción te permite ver todos los materiales del curso, enviar las evaluaciones requeridas y obtener una calificación final. También significa que no podrás comprar una experiencia de Certificado.
¿Qué recibiré si me suscribo a este Programa especializado?
Cuando te inscribes en un curso, obtienes acceso a todos los cursos que forman parte del Programa especializado y te darán un Certificado cuando completes el trabajo. Se añadirá tu Certificado electrónico a la página Logros. Desde allí, puedes imprimir tu Certificado o añadirlo a tu perfil de LinkedIn. Si solo quieres leer y visualizar el contenido del curso, puedes auditar el curso sin costo.
¿Hay ayuda económica disponible?
Sí. En ciertos programas de aprendizaje, puedes postularte para recibir ayuda económica o una beca en caso de no poder costear los gastos de la tarifa de inscripción. Si hay ayuda económica o becas disponibles para tu selección de programa de aprendizaje, verás un enlace para postularte en la página de descripción.

¿Tienes más preguntas? Visita el Centro de Ayuda al Estudiante.

Desarrolla habilidades para tus empleados e impulsa los resultados de la empresa

Descubre Coursera para Empresas

The Arduino Platform and C Programming

Acerca de este Curso

Habilidades que obtendrás