Chevron Left
Volver a Pressure, Force, Motion, and Humidity Sensors

Opiniones y comentarios de aprendices correspondientes a Pressure, Force, Motion, and Humidity Sensors por parte de Universidad de Colorado en Boulder

4.7
estrellas
214 calificaciones

Acerca del Curso

"Pressure, Force, Motion, and Humidity Sensors" can also be taken for academic credit as ECEA 5342, part of CU Boulder’s Master of Science in Electrical Engineering degree. This is our third course in our specialization on Embedding Sensor and Motors. To get the most out of this course, you should first take our first course entitled Sensors and Sensor Circuits. Our first course gives you a tutorial on how to use the hardware and software development kit we have chosen for the lab exercises. This third course assumes that you already know how to use the kit. After taking this course, you will be able to: ● Understand how to specify the proper AC or DC motor for a machine design. ● Integrate the motor to a machine, based on analysis of motor equations for voltage, current, torque and speed. ● Implement the motor and accompanying rotary sensor into a motor control circuit in both hardware and software. ● Add a motor and motor control circuit into a microprocessor based development kit. ● Create hardware and firmware to process motor feedback data to a microprocessor for further evaluation. After taking this course, you will be able to: ● Understand how to specify the proper pressure, force, strain, position, motion, acceleration, occupancy, and humidity sensors for taking real-time process data. ● Implement these sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. In this course you will build the circuit from Video 7 (Lab Exercise on strain gauges), Module 2 (Force and Strain Sensors and Touch Screens), and use it to make screen shots of the timing of the switch. If you haven't already wired up the system and written all the software per the instructions of Video 7, please do so now. You will need to buy the following components to complete this assignment. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. One part needs to be purchased off the Sparkfun website www.sparkfun.com. Or, you may obtain the specs from the site, and purchase them elsewhere. Digikey Part numbers are typed out here: 428-3390-ND CF14JT22K0CT-ND CF14JT100KCT-ND Table shown here: Index Quantity Part Number Description 1 1 428-3390-ND PSOC 5LP PROTOTYPING KIT 2 2 CF14JT22K0CT-ND RES 22K OHM 1/4W 5% AXIAL 3 1 CF14JT100KCT-ND RES 100K OHM 1/4W 5% AXIAL Sparkfun part numbers are typed out here: TAL221 Table shown here: Index Quantity Part Number Description 1 1 TAL221 Mini-load cell - 100g, straight bar Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

Principales reseñas

BJ

14 de ago. de 2022

Great introduction course to sensors. I really enjoyed the instructors videos as they were clear and engaging. I would recommend it.

TH

27 de ago. de 2020

This course is very interesting. I completed this course.But I can not get my certificate.Please help me to earn my certificate.

Filtrar por:

1 - 25 de 48 revisiones para Pressure, Force, Motion, and Humidity Sensors

por JiaJie, X

15 de jul. de 2020

por Paul P

9 de abr. de 2020

por Pablo C S

12 de nov. de 2019

por HET V B

28 de jul. de 2020

por Amit A

5 de jul. de 2020

por Vinsensius C F

1 de may. de 2020

por Enrique V

29 de may. de 2020

por MR. V S

12 de may. de 2020

por Abhishek K

10 de may. de 2020

por Mr.KAUSTUBH K S

21 de abr. de 2020

por Bonifasius B S A

16 de may. de 2020

por Ngo T D

4 de mar. de 2021

por Guillaume V

3 de abr. de 2020

por Brittany j

15 de ago. de 2022

por Theint Z H

28 de ago. de 2020

por Kasuntha M

11 de nov. de 2020

por Sachin G

3 de nov. de 2020

por Nimisha M

23 de dic. de 2020

por KARIMULLA S

3 de ago. de 2020

por Pankaj R

20 de sep. de 2022

por Ganesh R P

23 de jun. de 2020

por Neredikomma S R

12 de jun. de 2020

por Yared B

28 de ene. de 2021

por Jos� R

2 de ago. de 2020

por P S K R

12 de jun. de 2020